Flower pot painting has never been so easy! I am about to show you a technique that you can use on your outdoor decor this summer to have gorgeous flower pots in a variety of styles. And yes this can be done in just 15 minutes or less! If you have missed any of our other clay pot ideas this week, be sure to catch up with day 1 of our series. You can also scroll to the bottom of this post and see what today’s bloggers have in store for you!
Have you heard of Chalk Couture? If not, this is definitely the place for you! Today I am going to show you all about layering colors of chalk with this product. You can also see my beginner’s guide here or my guide on creating custom gift bags here. This is my latest obsession and I am working my way through the basics for now. There is oh so much you can do with this product.
Make some Easter bunnies from scrap wood for your spring decor. This is an easy project that will look great in any home. The main material? Scrap 2×4 ends that you may just have around your home already. This post is sponsored by Testors, however, all projects and opinions are my own.
You can make this cute Easter wreath in minutes with a few bandannas and some other supplies. I love how easy this one is and how inexpensive! A great way to add some spring cheer to your front door. Are you ready to make an Easter wreath for yourself or someone you love?
Making custom gift bags has never been easier! Chalk Couture makes projects like these super simple and professional looking. I love how this one turned out and it really is an easy project. Make yours like mine or use one of the dozens of transfers available to customize your options.
I have always loved chalkboard art. Imagine all of those gorgeous creations on a chalkboard! Now imagine changing your decor out whenever you feel like it just by drawing on something new. Yes I have loved it. But I have never been able to successfully do it! Until now! I have an easy way that anyone can create their own chalkboard art and you are not going to believe the results. Plus this method does not use any fancy machines or tools. Now that is what I call a win-win.
Did you know that you can make your own DIY photo coasters? I have a fabulous method below that will give you professional results every single time. It uses two products you might not be familiar with – 2 part epoxy resin and printable tattoo paper. What?? Read on to find out more! This post is sponsored by Environmental Technology, Inc however all projects and opinions are my own.
Supplies needed to make DIY photo coasters:
- Wood coasters
- Printable tattoo paper
- EnviroTex Lite® Pour On High Gloss Finish
- White craft paint
- Measuring cups
- Mixing cups
- Stir sticks
- Paint brush
- Printer and ink
- Protective gloves
Want to learn more about 2 part epoxy resin? You can watch me make the coasters in the video below and get tons of tips and tricks.
Can’t watch the video or missed some of the steps? Just follow along below!
Step 1: Painting
Start by painting your coasters. I used two coats of white chalk paint on all surfaces (top, bottom, and sides). Be sure to allow to dry in between coats and also before continuing with the tutorial. It is important to paint or seal your coasters when using the tattoo paper method of image transfer.
Step 2: Image transfer with tattoo paper
In the meantime, you can print your images onto your printable tattoo paper. I did mine in black and white. Be sure to mirror your images before printing so they will be the correct orientation when transferred to the coasters.
Follow any instructions that comes with your tattoo paper. For this packet, you peel back the liner on the adhesive and put it on top of your printed images. I pressed it down really well using a stir stick like a squeegee.
Trace the coasters with a pencil on top of the images. Cut out with scissors.
Now just peel away the clear liner to expose the adhesive. Turn the image over with the adhesive down and place it on your painted coaster. Press down really well. Again I used a stir stick like a squeegee to ensure complete adhesion.
Then use a damp rag on top of the paper that is covering your image. Do not rub. Just press with the wet rag. Eventually the paper will start to lift from the image. Remove the paper and you are left with a gorgeous image on your coaster. This is by far my favorite method for adding a printed image to wood.
Step 3: Seal
You will need to seal the images before continuing to make your DIY photo coasters. I used two coats of decoupage medium. Apply one horizontally and one vertically allowing to dry in between coats. Also you will want to make sure to get all the way to the edges. Then allow your coasters to dry really well before continuing.
Step 4: Pouring your resin
Now it is time to make a glossy, thick coating on your DIY coasters. You will need to protect your work surface. For this, I use paper plates. You will also want to raise your coasters up off the work surface. I just used a clay pot turned upside down for this purpose.
I also like to put painter’s tape around the edges of the coasters to protect the edges. Just apply tape all the way around pressing down well to ensure adhesion. Repeat for all four coasters.
Then put on your protective gloves and start mixing your resin. You will want to follow all instructions that come with the box for this step. Measure equal amounts and use the two container mixing procedure outlined in the instructions. Once you have completed that, you are ready to pour. I like to pour some resin in the center of my coasters then tilt them to get complete coverage.
Once covered, I set my coasters on the terra cotta pots over the paper plates. You can then follow the instructions for popping any bubbles that may rise to the surface. I would recommend waiting an hour or so then carefully taking off your tape and wiping away any resin that may have leaked through. Then let your DIY photo coasters rest flat and level until they are fully cured (I do about 24 hours).
You can tell how glossy they are in the image below! I love the thick professional finish to these and how great they look! Between the awesome tattoo paper transfer method and the epoxy resin coating, these coasters look like you had them professionally made. They are the perfect gift idea for Mother’s Day or any occasion really.
Grab your supplies and do not be afraid of resin! There is a learning curve, however, the results are definitely worth it.
Now, get started picking pictures to make your own DIY photo coasters. You might even make a list of everyone in your life that may need a set!
Wood burning ideas are some of my favorite crafts. Today we are going to talk about how to make DIY coasters but you can use wood burning to create a wide variety of projects. It is actually super simple but might sound a little scary to you. Never fear! We have all of the details below!
This double photo frame is one of my favorite projects of all time. You can make this for your home using your Cricut machine to cut the vinyl. Yes we even have a free template that makes it super simple! This quick and easy project is perfect for those that want to add a little rustic, farmhouse style to any room in their home.
Cat in the Hat activities are the perfect way to celebrate Read Across America Day. Make a Seuss bookmark with shrink plastic in minutes. You remember shrink plastic right? I am willing to bet that you made shrinky dinks when you were little. Well guess what….it is perfect for crafts now that you have grown up a bit as well. This project is also so easy that the kids can do it but don’t let them have all of the fun.