• For the polymer clay, the color doesn’t really matter.  I think a neutral color is a good idea but really, I would choose your rusted paper pattern and go with something that coordinates with that.
• We will be painting all the areas that are exposed, we just don’t want it to show through the paper.
• My clay came with a set of clay tools.  These aren’t required but they are helpful.  If you don’t have clay tools a knife will work just fine.

How to Make Metal DIY Numbered Tags

• To begin we’re going to choose our clay color and then roll out a piece that is big enough for our stencil number and the tag.
• You want the clay to be rolled pretty thin, about ⅛-¼” thick.  While these are going to look rustic we do want them to be pretty much the same thickness all the way across.

Cutting Out Stencil Numbers

• When it comes to cutting out your number you have a lot of options.  I had this number stencil on hand so I am using it.
• You can also use your Cricut machine to cut out a stencil.  You have a lot of freedom when you use your Cricut to create your stencil.  You’re able to use any stencil font to create the number you’ll use.
• If you want to use your Cricut to create a stencil I have a file you can use in Design Space here.  I did not weld the design so you can change the number to any number or letter you want.
• If you’re using your Cricut to cut out a stencil make sure you use a material that is thick enough to hold its shape while you’re cutting out the clay.
• As I mentioned above, my clay came with some tools.  To cut out my stencil I laid my stencil on top of the clay and then used the tool to cut out the number.
• When placing your stencil make sure you’re leaving plenty of room all the way around your number to cut out the tag shape.
• For the tag shape, I chose to freehand mine.  You can choose to do that or use the shape from my Design Space file to create a stencil.
• I found that using a straw worked perfectly to make the hole in the top of my tag for the twine or rope to go through.
• When you’re happy with the look of your numbered tag you can bake it.  Follow the directions for your specific polymer clay to ensure it’s baked correctly.
• When it’s done baking allow it to cool completely before proceeding.

How to Paint Your Baked Clay

• Whether or not you need to paint your clay depends on if the color of your clay will match your rusted look.
• Mine did not, so I chose a gray paint that blends in well with my rust look.
• When we’re done with our project only the edges of the clay will show.  We don’t need to paint the entire piece, just go over the edges with a coordinating paint color.

How to Make Our Numbered Tag Look Like Metal

• Now that we have our clay tag prepped and ready it’s time to make some magic.
• At this point, you may be asking yourself “How are we going to make this look like metal?” I have a trick you’re going to absolutely love.
• The first thing we need to do is find a rusted textured digital paper pattern that has the look we like.
• Unfortunately, the paper I originally used is no longer available but I found a couple of others that I think are great options.
• Rust Papers and Patterns
• Rusted Metal
• Choose the digital paper you like and print it out.  I don’t recommend printing it out on high quality because that puts a lot of ink on the paper and we don’t want it to smear when we add it to the clay.
• A regular print setting should work just fine for this project.

Trim the Rust Paper to Fit the Tag

• Lay your tag on top of the printed sheet and trace around it with a pencil.
• Make sure you trace both the front and the back of the tag.  We want to cover both sides.
• Use an exacto knife to cut out the tag from the paper and do the front and back.
• Now it’s time to break out the Mod Podge.

How to Mod Podge Metal Images Onto Clay Tag

• Applying the rusted metal image is really easy.  We’re going to use Mod Podge to apply the rusted metal image.
• I like to add a thin layer to the back of the print and another thin layer to the clay tag.  Foam paintbrushes are great to use with Mod Podge.
• Lay the image on the tag and smooth it out really well making sure it’s attached to the tag everywhere.
• Repeat the process for the other side.
• If your image ends up being larger than your tag you can wait for the Mod Podge to dry and then using either sandpaper or your exacto knife you can remove any excess paper.
• When the edges are how you want them, go over the whole thing with Mod Podge.
• When everything is dry all that’s left to do is to add your cording or twine through the hole and your DIY numbered tag is finished and ready to display.