Now, you will need to use transfer tape to put your design on your project. If you have never used transfer tape before, this basic tutorial might help.
Add the transfer tape to the regular vinyl first. Press down well and remove the backing from the vinyl. Then peel away from the backing paper. Apply this first layer to your white wood panel. Press it down well.
Then just peel back the transfer tape to reveal your design.
You can use the same transfer tape for the mosaic vinyl. It actually transfers in the same way. Just apply the transfer tape to the design and press down well. Remove the mosaic vinyl from the backing paper then add to your design on the wood panel. Just be sure to line up with the design we just put on above.
Press it down well and start peeling back the transfer tape to reveal your completed project!
Be sure to burnish both pieces of vinyl down well at the very end to make sure everything adheres well.