DIY Baby Booties with Iron-on Vinyl
DIY baby booties are the perfect introduction to baby Cricut projects. All you need to do is add iron-on vinyl to plain booties! You can also do this project with onesies, bibs, or anything else a baby uses! Make them funny with our cute design or create your own design as well. Either way, the parents-to-be are sure to love these cute little shoes for their little one. If you are searching for the perfect DIY baby gift, this project is for you!
What You Will Need
Instructions
- Access the cut file linked above, or make your own version.
- Resize the file to fit the shoes (or item) you are using for this project. Then be sure to mirror it before cutting away from the iron-on. Always cut iron-on shiny side down.
- Weed away all excess from the outside as well as the centers of the letters. Weeding tools make this easy but are not required.
- Then, position your design on the bottom of the shoes and use the EasyPress or iron to press for the recommended amount of time. I find that using a scraper or flat edge to press the design down after heated helps it to adhere well.
- Remove your carrier sheet and your DIY baby booties are complete!
Notes
- Use this process to adhere heat-transfer vinyl to any surface or baby item.
- More about the best surfaces for HTV.