Go Back
–+ servings
farmhouse style succulent planter
Print Pin

DIY Concrete Planters (With Mason Jars)

Did you know that you can make your own mason jar planter from concrete? It is actually a fairly easy process, and this adorable mason jar-shaped pot can be yours! You can, of course, make an extra for a gift, but you will definitely want at least one in your home.
Makes 1 planter
Author Angie Holden

What You Will Need

Instructions

  • Start by following the instructions here for how to make your mason jar mold!
  • Then, add mold sealer to the bottom of your mold, being sure not to leave any gaps.
    Press well into the bottom of a metal bowl.
  • Add a "handle" to your pill bottle with some hot glue, as shown below. This will ensure that it does not sink too far and that you are able to remove it easier.
  • Coat both the inside of your mold and the outside of the pill bottle with oil or cooking spray.
  • Measure according to the package directions for a thin mix, then add a little more water. About 1/2 to 1 tablespoon of additional water should work.
  • Start adding your concrete mixture to the bottom of the mold. Use an additional craft stick to press the concrete into the bottom and sides as you add.
  • Fill the mold almost to the top, and then press your pill bottle into the center. The mixture should come almost to the top but not quite.
    If you have too little, remove the pill bottle and add more. If you have too much, remove the pill bottle and remove some. Then, press your pill bottle into place once more.
  • Allow your concrete to cure completely before removing the pill bottle or the mold.
  • Once everything is cured, just remove the mold from the metal bowl. Next, remove the pill bottle from the center by twisting (you may need pliers). Then, just work your mold until the planter pops free.
    Add in the dirt and a plant and your cute planter is ready for display!